产品特点及介绍
Point
①BSSP (微型滚珠丝杆花键) 与中空马达相组合的紧凑型执行器.
②不仅是直线运动 ( Z ) , 旋转运动 (θ) , 还能实现利用中空的吸附功能 ( Vacuum ).
③直接驱动, 抑制传送带等产生的磨损粉.
④减少部件数, 简化构造, 节省空间.
●延长线 / Extension Cable
备有常用电线和机器人电缆两种可供选择。 Extension Cable between KSS Dire Drive Auator.KSS recommended Stepping Motor Driver.
You can designate the type of Conneor.
Both normal & Robot cable will be provided. Please ask KSS representative for more detail.
●标准驱动器 / Stepping Motor Driver
SD4030B
KSS 直线驱动执行器推荐使用的驱动器。 可设定 8 种步进角
This is recommended 2-phase stepping Motor Driver for Dire Drive Austor.
It has Micro-Step funion with 8-step angle.
产品型号及含义
Model
①系列号
DDA:直接驱动执行器系列
②执行器种类记号
Z:Z θ执行器
VZ:VZ θ执行器
③马达尺寸
42:42 角步进马达
④丝杠种类
G:精密滚珠丝杠+滚珠花键
⑤导程 / 节距(mm):05 表示 5mm
⑥行程(mm):050 表示 50mm
⑦构造记号
TW:塔型
⑧连接器种类
N:散线
H:广濑( HRS ) RP17
E:EI 连接器( AMP 制)
⑨特记
产品图纸
Drawing
●规格 / Speccifications
※θ轴允许负载力矩请参照【负载力矩参照表】 。
For the Maximum Permissible Moment, see “ Reference of Moment of Inertia" table below.
注意事项:
1 ) Z 轴无制动装置,关闭电源 Z 轴有可能会落下。请注意。
2 )负载力矩参照表为理论值。建议使用之前在实际负载力矩上确认运作状况。
Precautions
1 ) The Z-axis does not have brake device. Please be careful when the power supply is switched off in case of Z-axis may free-fall.
2 ) Reference of Moment of Inertia table shows the theoretical values.
KSS recommends that you should apply aual moment to the machine.confirm the safety operation before use.
●外形图 / Overall Dimension
Z θ系列 行程 50mm
Z θ ( Z-theta ) Type Travel 50mm
VZ θ系列 行程 50mm
VZ θ ( VZ-theta ) Type Travel 50mm
求购广东深圳二手DDA机床附件设备1000套,成色全新,求购价格电议或面议,信息有效期至长期有效。
免责声明
以上展示的信息由会员自行提供,内容的真实性,准确性和合法性由发布会员负责,网优fengj.com对此不承担任何责任.为规避买卖风险,建议您在购买相关产品前务必确认供应商资质和产品质量.