中国制造电缆桥架成型生产设备——江阴市博世杰
江阴市博士杰科技有限公司是专业的制造电缆桥架成型设备的江苏地区的供应商
联系人:汤灵珠 联系电话:13906181752
电缆桥架设备
一、生产工艺流程
One, the produion process
开卷放料——校平——冲孔——切断——成型——出料
Open book feeding, leveling, punching, cutting, molding, discharging
二、设备性能 Cable tray equipment
可根据生产需要轧制个带钢宽度60mm≤&se;≤600mm多种规格的电缆桥架及其他结构产品。
Equipment performance
According to produion needs a strip width of rolling 60 mm.less &se; 860 mm.less struure of a variety of specifications of the cable tray.other produs.
线冲孔时生产速度:2.5~5米/分钟。
Line punching produion speed: 2.5 ~ 5 meters per minute.
成型设备连续成型速度时:10~15米/分钟。
Molding equipment for continuous forming speed: 10 ~ 15 m/min.
板材料厚:1~2mm。
Thick plate material: 1 ~ 2 mm.
材质要求:Q235冷轧板。
Material requirements: Q235 manufaure.
生产线分自动和手动两种操作方式,可实现联动和分段运转作业。
Produion line both automatic.manual operation mode, which can realize linkage.staging operation work.
三、产品说明:Produ description:
全自动生产线采用双侧悬臂式结构,冲孔及成型工艺在线一次性完成。通过电气控制,自动移动调节生产不同宽度、高度桥架产品。
Fully automatic produion line adopts bilateral cantilever struure, punching.online a one-time molding process. Through the elerical control, automatic mobile to adjust produion of different width, height bridge produs.
电缆桥架设备是江阴市博士杰科技有限公司的拳头产品。
温馨提示:【中国制造电缆桥架成型生产设备】是由【江阴市博世杰科技有限公司】提供的,想了解更多关于【中国制造电缆桥架成型生产设备】的相关系信息,请拨13906181752,联系人:汤灵珠。