邦飞利电机
IEC标准的BN电机遵循国际标准和EMC与LV标准。功率在0.06-30KW范围内,可地脚安装,也可以B5或B14法兰安装。通常有单极和双极电机,提供了三种制动形式,一种直流和两种交流,所有电机均可用于变频器控制。
The IEC-normalized BN motors comply with all the applicable international standards, including the EMC.LV Directives. They are available in the foot.the flange mounting version, the latter in both the IM B5.the IM B14 configuration.
Single.dual polarity versions are available; three possible brake options are offered one DC.two AC supplied, granting further flexibility to the system. Finally, all BN motors are inverter duty.
Type 4 poles Power kW
BN 71A 0.25
BN 112M 4.0
BN 132S 5.5
BN 132MA 7.5
BN 132MB 9.2
BN 160MR 11.0
BN 160L 15.0
BN 180M 18.5
BN 180L 22
BN 100LB 3.0
BN 100LA 2.2
BN 71B 0.37
BN 71C 0.55
BN 80A 0.55
BN 80B 0.75
BN 80C 1.1
BN 90S 1.1
BN 90LA 1.5
BN 90LB 1.85
BN 200L 30
技术参数
Power Range for wind turbine drives
From 0.25 kW up to 30 kW
Frame Sizes
From IEC 71 up to 200
Pole Numbers
4, 6
Mounting Options
Foot IM B3, Flange IM B5.IM B14
Voltage
230/400 - 400/690 V
Frequency
50 Hz.60 Hz
Compliance
2006/95/CE (LVD).2004/108/CE (EMC)
CSA.UL Approved Design
Inverter Duty
All Frame Sizes
Housing
Cast Aluminium
Degree of protection
IP54 - IP55
Insulation class
CLF - CLH
Main Brake Features
DC.AC supply
Adjustable braking torque
Main Options
PTC thermistor.bimetallic thermostat sensors
Separate supply forced ventilation
Line Driver.Push-Pull Incremental Encoder
Heaters
Splined shaft
Double disc brake
Microswitch brake feedback
AC/DC Rectifier
Fast engage brake rectifier through electronic control