美国热压炉 (以下配置仅供参考,更大压力,更大腔体,更大温度都可提供)
APPLICATION(应用)
Vertical Laboratory Vacuum Hot Press furnace for thermal processing of research materials
Temperature - rated for up to 1500°C maximum while pressing; ramp rate, 10°C/minute nominal
Hot press - single 5 ton automatic ram in top with fixed pedestal on bottom
Ram travel - 4” stroke length
Work area - 4” diameter x 6” high, graphite hot zone
Vacuum - ultimate vacuum <25μ; leak rate <10μ/hour CEDORT (Clean, Empty, Dry, Outgassed at Room Temperature)
Controls - automatic ramp / soak temperature control; manual control of vacuum pumps.ram pressure
Options available for higher temperatures, improved vacuum levels, metal hot zones for clean processing.enhanced controls
CHAMBER(腔体)
Vertical jacketed chamber - 16” diameter x 16” high, nominal dimensions
All SA-516-70 mild steel construction, chamber, jacket, cover.flanges
Top-loading chamber - cover raised with manual hydraulic jack, swings aside for full access to load, with buna o-ring, manual clamps, for operation from vacuum to 3 psig
HOT ZONE(热区)
Vertical graphite hot zone - graphite element cage, rigid graphite board insulation
Dimensions - sized for 4” diameter by 6” high die set
Temperature - rated for continuous operation at 1500°C while pressing
Heated all around perimeter; not heated on ends
System can operate in vacuum.inert gas
HOT PRESS(压力)
Hydraulic press - automatic 5 ton cylinder, 4” stroke, mounted above chamber
Load train - 3” diameter graphite ram, 3” diameter water-cooled ram extension
Graphite pedestal for bottom support of die, rated for 5 tons
Press control - manual pump with dial pressure gauge