高温压力试验装置:HTI-1
产品概述:本装置符合GB2099.1-2008图41、IEC60884-1-2002标准30.1条款图41、IEC60598- 2-20Clause20.15(也称为绳灯绝缘皮硬度测试架)、EN60811-3-1等标准要求。
刀口厚度:0.7±0.01㎜
负荷:2.5N砝码(或可调)
工位:2位。
Produs Information
Indentation Device High temperature Indentation Device HTI-1
Produ details:Model HTI-1. This apparatus has a reangular blade (see figure 41a) with an edge 0,7 mm wide, to be used in the case of round pins,.a blade .a round shape (see figure 41b), with a diameter of 6 mm.an edge of 0,7 mm, in other cases.
The specimens are placed in position of the apparatus.
The force applied through the blade is 2,5 N.
The apparatus, with the specimen in position, is maintained for 2 h in a heating cabinet at a temperature of (200 ± 5) °C.
The specimen is then removed from the apparatus and, within 10 s, cooled by immersion in cold water.
The thickness of the insulation remaining at the point of impression is measured.shall not have been reduced by more than 50 % of its original value measured at the start of the test.
No.of Test Station 2
Weight: 2.5N*2(or .able)
Edge Thickness: 0.7±0.01mm
Conforms to standard: IEC 60884-1 Fig41, VDE0620, BS1363,IEC60598-2-20clause20.15,IEN60811-3-1
供应广东佛山二手无报警消防装备设备1套,成色全新,供应价格100,信息有效期至2019-06-17。
免责声明
以上展示的信息由会员自行提供,内容的真实性,准确性和合法性由发布会员负责,网优fengj.com对此不承担任何责任.为规避买卖风险,建议您在购买相关产品前务必确认供应商资质和产品质量.