┏━━━━━━━━━━━━━━━━━━━━━┳━━━━━┳━━━━━━┓ ┃ ┃ ┃ ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃镦锻工位数Median heading blacksmith ┃ 个A ┃ 4 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 额定镦锻力Rated upsetting force ┃ KN ┃ 1200 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃切断直径Maximum cutting diameter ┃ mm ┃ 14 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 切断长度Maximum cutting length ┃ mm ┃ 150 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃制件杆部直径Shank diameter parts ┃ mm ┃ 12 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃制件杆部长度Minister degrees rod parts ┃ mm ┃ 20-120 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 螺纹长度Maximum thread length ┃ mm ┃ 45 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 四模推出长度 ┃ mm ┃ 125 ┃ ┃ Maximum length of the die launched ┃ ┃ ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 冲头推出长度 ┃ ┃ ┃ ┃ Maximum length of the punch launched ┃ mm ┃ 25 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 镦锻工位距 ┃ ┃ ┃ ┃ Heading away from the blacksmith bit ┃ mm ┃ 1 10 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 凹模子L直径Die diameter ┃ mm ┃ 80 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 冲头子L直径Punch diameter ┃ mm ┃ 60 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 主电机功率Main motor power ┃ mm ┃ 22 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 生产率Productivity ┃ pcs/min ┃ 100-120 ┃ ┣━━━━━━━━━━━━━━━━━━━━━╋━━━━━╋━━━━━━┫ ┃ 机器重量Weight ┃ kg ┃ 23000 ┃ ┗━━━━━━━━━━━━━━━━━━━━━┻━━━━━┻━━━━━━┛
以上数据仅供参考之用,本公司随时进行技术改进、因此保有随时更改设计规格之权利 ZD47 multi-station automatic cold header sent by Chang closed clamp the workpiece;each of the clamp closed time sheets can be individually adjusted; sleeve with full roundcutter, cut flat, Major Action Agency (cut, die introduction of feed, etc.)drive by connectingrod form; meet with the broader market round feeding 6 Roll institutions, to achieve bolts,screws from the cutting, upsetting to a line of automated production thread rolling; the thirdwork Introduction die bit for trimming process.upsetting process, transform easyadjustment; punch each station has launched organizations,.separately adjusted, withpneumatic control of the clutch.brake, so that the main motor at no load Start, inchingflexible, convenient when debugging tools, stop automatically when the slide stop after themain point only.