Our new Micro Facing Tool was designed to face 1/8" to 1" tubing. We also offer two collets: our standard collets for facing micro fittingshort tubing from .20" longour extended collets for 1"above. This new machine will let you face quicklysquarely every time. You will also find this machine has an nobstructed view of the tool bittubing. Stainless collets will not damage your electro-polish tubing. Our feed indicator will give you precise lengths every time. We offer this machine in both 110V230V motors. Our variable speed motor is standard,you can up-grade to our Metabo motor with constant speed control that will keep the RPM constant under load. This speed control will help give you longer life with your tools bits. We also offer battery powered motors with long lasting batteries to keep your tool working. PERFORMANCE: Size range 1/8 to 1 inches (3.175 mm - 25.4 mm) Standard 110V variable speed motor Portablemountable for high volume production Easy replacement of colletssize ranges 8 lbs. approximate working weight18 lbs. approximate working weight Adjustable measure indicator for accurate facing 0.015 incheslonger Large view port for easy bit replacement Faces most metalsplastics, including high nickelcarbon steel materials Tool bit designed to keep chip out of polished ID
Tool Bits are designed to keep chips out of polished ID Tubing. Our laser coated tool bits will give twice the life of standard bits. Note: We recommend using Extended Collets if tubing is longer than 2inches. For TSM-1501M accessories, please visit our websitecontact our sales department for further assistance