此產品由不銹鋼金屬本體和寶石精密加工、組裝而成,廣泛應用於各類型高檔全自動繞線機。線咀安裝於繞線機機械手的末端處,漆包線從中穿過,並在其引導下進行繞線加工,是繞線機上不可缺少的重要部件,同時也是保證繞線機所加工產品品質的關鍵部件。而線咀的主要功能也是保護漆包線的絕緣層。
本產品是利用紅寶石材料具有極其堅硬和耐磨的特點,用精密設備對其進行精密的磨削加工和拋光,加上先進的工藝,使內孔和外徑及R處的粗糙度達到Ra0.025以上,在使用中對漆包線的損傷概率極低。結合不銹鋼具有良好韌性的特點,精細的加工鑲嵌組合而成。
優點:有較好的韌性,寶石頭部摩擦係數低,具有超長的使用壽命。
適用:適用於精細線圈和細線繞線加工。
加工極限:d1≥0.2 mm
D1≥0.7 mm
This product is assembled by the stainless steel main partthe processed stones. It has been widely used in various types of CNC automatic winding machine.The nozzle is installed at the end of the mechanical hand of the winding machine, the enameled wire will go through itdo the winding job under the guidance of its processing. It is not only the indispensable component of the winding machine, but also the key components which are used for ensure the quality of processed products. The main function of the nozzle is the protection of the enameled wire insulation layer.
The ruby material has the characteristics of extremely hardwear-resistant, we do the precision grindingpolishing by using sophisticated equipment under these characteristics, coupled with advanced technology, the roughness of bore, surfaceR place will be reached over Ra0.025, therefore the rate of damage will be extremely low. We do the fine mosaic with the good toughness characteristics of the stainless steel.
Advantages: good toughness, low friction coefficient of the ruby head, long life.
Apply: applicable to fine coilcoil processing of thread .
Processing Limit: d1 ≥ 0.2 mm
D1 ≥ 0.7 mm