SS型三足式上部卸料沉降离心机 主要产品型号规格 SS450-N SS600-N SS800-N SS1000-N 产品结构原理 电动机带动转鼓旋转,物料由上部加入无孔转鼓,在离心力作用下,较重的固相物沉积在转鼓壁形成沉渣层,轻相物形成内层液环,澄清后的内层液相物可翻过拦液板溢流出转鼓,也可用撇液管在运转中引出转鼓,固相物则在停机后人工从转鼓上部卸出。 产品特点与用途 SS系列离心机是一种三足式上部卸料,间歇操作沉降离心机。该系列离心机转鼓壁无滤孔,操作时不需滤布。适合含固相物颗粒细、粘度大、浓度低、过滤介质再生困难、固相物比重大于液相物的悬浮液的固液分离,所以常用于采用离心过滤难于分离或澄清液达不到要求的场合。 特别提示: 1、技术参数以产品说明书为准。 2、洽询时,请顾客详细赐告物料特性参数及工况条件要求。 SS-three-foot upper part of the settlement discharge centrifuge Model SS-Three-column Top Discharge Sedimenting Centrifuge Main specifications Model SS450-N SS600-N SS800-N SS1000-N The principle product mix Motor driven rotating drum, the materials from the upper hole to join non-drum in the role of centrifugal force, the heavier solid-phase deposition in the sediment layer to form drum wall, with light to form the inner-loop solution, after clarification of the inner liquid Phase can be fluid over the plate to stop the overflow drum, can also be used in the operation of the write-liquid pipe leads in the drum, the solid-phase-down in the upper part of the drum from the man after unloading. Product characteristicsuses SSC series centrifuge is a three-foot upper part of the discharge, intermittent operation of centrifuges settlement. The series centrifuge drum wall holes without filter, filter, is not required to operate. With solid-phase material suitable for fine particles, viscosity, low concentration, the filter medium renewable difficulties, solid-state-of-proportion than the liquid suspension of the solid-liquid separation, so often used in centrifugal separation difficult to filternot up to Chengqing Ye To the requirements of the occasion. Special tips: 1, the technical parameters in order to prevail products Prospectus. 2, contact time, customers in detail the parameters Cigao material characteristicsworking conditions demands.
供应湖南湘潭二手SS-800库存物资10,成色8成新,供应价格电议或面议,信息有效期至2009-09-17。
免责声明
以上展示的信息由会员自行提供,内容的真实性,准确性和合法性由发布会员负责,网优fengj.com对此不承担任何责任.为规避买卖风险,建议您在购买相关产品前务必确认供应商资质和产品质量.